Features Settings - Sony RDR-GX3 Operating Instructions Manual

DTS (DVD VIDEO only)
Selects whether or not to output DTS signals.
On
Select this when the recorder is connected to an
audio component with a built-in DTS decoder.
Off
Select this when the recorder is connected to an
audio component without a built-in DTS
decoder.
Note
When you use the DIGITAL OUT (COAXIAL) jack to listen to MPEG
audio signals and set "MPEG" to "MPEG" in Audio Setup, no sound will
come from your speakers if you select one of the TVS modes.
84

Features Settings

Features Settings
The Features Setup provides entries to the following features.
Select "Features" in the Setup display. To use the display, see
"Using the Setup Displays" (page 77).
The default settings are underlined.
SETUP
Settings TV Direct Rec :
Video Auto Chapter :
Audio TV Guide Page
Features Parental Control
Options
Easy Setup
TV Direct Rec (DVD-RW/DVD+RW/DVD-R only)
On Allows you to easily record what you are
watching on the TV using SMARTLINK.
Off
Turns off the TV Direct Rec function.
Auto Chapter
Automatically divides a recording (a title) into chapters by
inserting chapter markings at specified intervals. The markings
are made during recording.
Off
No chapter mark is inserted.
6Min Inserts chapter marks at approximately 6
minute intervals.
15Min Inserts chapter marks at approximately 15
minute intervals.
Note
The interval is only an approximation. The actual interval may vary
depending upon the size of the recording being made.
TV Guide Page
Some broadcast systems ensure a Teletext service* in which the
complete programmes and their data (title, date, channel,
recording start time, etc.) are stored day by day. A TV guide
page corresponds to each day of the week. When recording a
programme, the recorder automatically takes the programme
name from the Teletext pages and stores it as the title name. The
TV guide page numbers depend entirely on the broadcast itself
and may be subject to change. If so, you may have to set those
TV guide page numbers manually in the TV Guide Page menu.
* Not available in some areas.
1
Follow steps 1 to 3 of "Using the Setup Displays"
(page 77) to select "Features" in the Setup
Display.
2
Press M/m to select "TV Guide Page" then press
, or ENTER.
The TV Guide Page menu appears.
3
Select the programme position for which you
want to set or change the TV guide page.
On
6 Min