Checking/Changing/Cancelling Timer Settings (Timer List); Disc Name - Sony RDR-GX3 Operating Instructions Manual

If the timer settings overlap
Overlapped timer settings are shown as follows.
Timer
These timer settings overlap. Do you want to save this setting?
Wed 29.10 21:00-22:00 AAB SP
Wed 29.10 20:30-21:00 DEF SP
OK Cancel
To store the setting, press </, to select "OK," then press
ENTER.
To cancel or change the setting, select "Cancel." When the
Timer List menu appears, change or cancel the setting (page 43).
When the timer settings overlap
The programme that starts first has priority and the second
programme starts recording only after the first programme has
finished.
7:00 8:00
Timer setting A
Timer setting B
will be cut off
When the recordings start at the same time
The programme that is set last has priority. In this example, timer
setting B is set after A, so the first part of timer setting A will not
be recorded.
7:00 8:00
Timer setting A
Timer setting B
When the end time of one recording and the start time of
another are the same
After finishing the previous recording, the other recording may
be delayed.
7:00 8:00
Timer setting A
Timer setting B
Note
When "PDC/VPS" is set to "On" for one or more timer recordings, the
start times may change in the event of a broadcast delay or early start.
9:00 10:00
9:00 10:00
9:00 10:00
Checking/changing/cancelling timer
settings (Timer List)
You can check, change, or cancel timer settings using the Timer
List menu.
a Press SYSTEM MENU.
The System Menu appears.
b Press M/m to select "TIMER LIST," then
press ENTER.
The Timer List menu appears.
TIMER LIST
-RW VR
Mon-Sat 22:00-22:15 SP
Wed 29.10 20:30-21:30 SP
Wed 29.10 21:00-22:00 SLP
Thu 30.10 16:00-17:00 SLP

1 Disc name

To enter a disc name, see "Labelling a disc (Disc
Name)" (page 73).
2 Timer information:
Displays the recording date, time, recording
mode, etc.
• indicates the overlapped setting.
a
• (red) indicates the setting currently being
recorded.
• (grey) indicates that the setting cannot be recorded
z
in the selected recording mode.
c Press M/m to select the setting you want to
check/change/cancel, then press ENTER.
The sub-menu appears.
d Press M/m to select one of the following items.
• Modify
• Erase
• Check Overlap
To modify the setting
A Select "Modify," then press ENTER.
The display for modifying appears.
Modify
Modify the timer setting.
Date Start Stop Prog.
Mon-Sat 22 : 00 22 : 15 AAB
B Press </M/m/, to select the item and
change the setting.
To undo the change, press </M/m/, to select
"Cancel," then press ENTER or RETURN.
To change another setting, repeat step 2.
C Press </M/m/, to select "OK," then press
ENTER.
Sports
AAB
PDC
DEF
VPS
PDC
GHI
VPS
DEF
OK
PDC
Mode
VPS Cancel
SP Off
,continued
Timer Recording
43