Recording From Connected Equipment Without A Timer - Sony RDR-GX3 Operating Instructions Manual

If the timer settings of a Synchro-Recording and
another timer recording overlap
Regardless of whether or not the programme is a Synchro Rec
programme, the programme that starts first has priority and the
second programme starts recording only after the first
programme has finished.
First programme
Second programme
48

Recording From Connected Equipment Without a Timer

7:00 8:00 9:00 10:00
will be cut off
Recording From Connected
Equipment Without a Timer
Connect a VCR, digital tuner, or similar device to the LINE 3,
LINE 2 IN or LINE 4 IN jacks (pages 27 to 28). Then, follow the
steps below to make a recording on this recorder.
Z
REC MODE
INPUT SELECT
a Turn on your TV and this recorder, then set
it to the connected channel ("VIDEO," etc.).
b Press Z, and place a recordable disc on the
tray.
c Press Z to close the disc tray.
Wait until "LOAD" disappears from the front panel
display.
d Press INPUT SELECT to select a input
source according to the connection you made.
The front panel display changes as follows:
Programme
L1 L2
position
e Press REC MODE repeatedly to select the
recording mode.
The recording mode changes as follows:
HQ HSP SP
TOOL
M/m, ENTER
X REC PAUSE
x REC STOP
L3 L4
LP EP SLP