Voice Recognition - Garmin GMA 350c Pilot's Manual

Pressing the PLAY Key once plays the latest recorded memory block. The
Play function can also be accessed via Voice Recognition commands. Refer
to the 'Voice Recognition' section for more information.
Pressing the MKR/MUTE Key during play of a memory block stops play.
If a COM signal is detected during play of a recorded memory block, play
is halted.
Pressing the PLAY Key while audio is playing begins playing the previously
recorded memory block. Each subsequent press of the PLAY Key selects
the previously recorded memory block.
Powering off the unit automatically clears all recorded blocks.

VOICE RECOGNITION

Voice Recognition allows the pilot (and optionally copilot) to control the
GMA 350/350c using spoken commands. To activate Voice Recognition,
push and hold the Push-to-Command (PTC) button while speaking a
command. When the Push-to-Command button is released, the GMA
350/350c will respond.
If a command is correctly interpreted by the GMA 350/350c, a positive
acknowledgement chime will be played, and the pilot should verify that the
correct button selection is indicated by the triangular annunciator lights.
Alternatively, some commands will be indicated by a voice response from
the GMA 350/350c. If the desired modes are not indicated by annunciator
lights or a voice response, the pilot should repeat the command by using the
Push-to-Command button, or by manually using the front panel controls of
the GMA 350/350c.
190-01134-12 Rev. K
Stops Play
Marker Mute Key
Garmin GMA 350/350c Pilot's Guide
GMA 350/350c Audio Panel
29