Garmin GMA 350c Pilot's Manual page 25

GMA 350/350c Audio Panel
If a command is incorrectly interpreted by the GMA 350/350c, a negative
acknowledgement tone will be played. The pilot should repeat the command
by using the Push-to-Command button, or by manually using the front
panel controls of the GMA 350/350c. In the event of any abnormal Voice
Recognition operation, the front panel controls may be used to override
Voice Recognition and manually control the GMA 350/350c.
The following table lists the available Voice Recognition commands, the
associated actions, and the voice response if applicable:
Control
COM
NAV
AUX
30
Example Phrase
"COM one"
"MIC one"
"COM one MIC"
"COM two"
"MIC two"
"COM two MIC"
"Split COM"
"Monitored COM mute" OR
"Mute Monitored COM"
"Disable monitored COM mute"
"Monitored COM mute disable"
"Disable mute monitored COM"
OR
"Mute monitored COM disable"
"NAV one"
"NAV two"
"AUX" OR "Auxiliary"
Garmin GMA 350/350c Pilot's Guide
Action
Toggles COM1 audio
Selects MIC1/COM1 audio
Selects MIC1/COM1 audio
Toggles COM2 audio
Selects MIC2/COM2 audio
Selects MIC2/COM2 audio
Selects split COM mode
Mutes monitored COM on
primary COM reception (refer to
Page 8).
Voice Response: "Monitor mute
enabled".
Disables monitored COM mute
on primary COM reception (refer
to Page 8).
Voice Response: "Monitor mute
disabled".
Toggles NAV1 audio
Toggles NAV2 audio
Toggles AUX audio
190-01134-12 Rev. K