Connection To Wincc - Siemens Library SENTRON 3WL Function Manual

4.4.2

Connection to WinCC

After the PLC program has been created, the driver block can be connected to WinCC. The
block icon that is associated with the driver block is used for this purpose that is installed in a
process display in the following manner.
● Select "Create / update block icons" function
– in property dialog of WinCC display "Select Derive block icons from Plant View" (as of
Library SENTRON 3WL / 3VL for SIMATIC PCS 7
Function Manual, 11/2008, A5E02316914A-01
PCS 7 V7.0 this tick is set automatically)
Figure 4-10 Basing the block icons on the plant hierarchy
Configuration Manual
4.4 Configuring a measuring point
135