Recording Settings (Video) - Sony RDR-GX257 Operating Instructions Manual

• If you make a mistake, press < repeatedly
to delete numbers one by one, then re-enter
it.
2
To change the password, press ENTER while
[Change] is selected.
[Erase]: Erases the password. Enter the
registered password.
3
Enter the registered password.
4
Enter a new four-digit password.
5
Enter the password again to confirm.
z Hint
If you forget your password, clear the password and
register a new password.
Press SYSTEM MENU and select [Setup] to turn on the
Setup Display. Enter the six-digit number 210499 using
the number buttons. Select [
registered password is cleared.
[Area Code]
Selects a code for a geographic area as the
playback rating level. See "Area Code List" (page
78).
1
Select [Area Code] and press ,.
2
Enter the four-digit password using the
number buttons.
3
Press M/m to enter the first character of the
area and press ,.
4
Press M/m to enter the second character and
press ENTER.
b
Notes
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
OK
] and press ENTER. The

Recording Settings (Video)

The [Video] setup allows you to adjust recording
and set top box settings.
Select [Video] in the Setup Display. To use
the display, see "Using the Setup Displays" (page
62). The default settings are underlined.
Disc Record Mode
DV Input
Auto Chapter
Set-Top Box Control
Set-Top Box Edit
[Disc Record Mode]
Selects one of the following recording modes:
HQ, SP, LP, EP and ULP (in the order of picture
quality).
[DV Input]
Selects the stereo track when recording from a
digital video camera connected to the DV IN jack
on the front panel.
[ Stereo 1 ] Records original sound at the time
of shooting. Normally select this
when dubbing a DV/Digital8
format tape.
[ Stereo 2 ] Records only additional sound
over-dubbed after shooting.
[Auto Chapter]
Automatically divides a recording (a title) into
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
[ No No chapter mark is inserted.
Separation ]
[ 5 Sets the interval to 5 minutes.
minutes ]
[ 10 Sets the interval to 10 minutes.
minutes ]
HQ
SP
LP
EP
ULP
,continued 67