Specifications - Sony HTP-78DW Operating Instructions Manual

Specifications

Amplifier section
1)
Power Output
Stereo mode (rated) (6 ohms, 1 kHz, THD 1%)
2)
Surround mode (reference) (6 ohms, 1 kHz,
THD 10%)
1)
Measured under the following conditions:
230 V AC, 50 Hz
2)
Reference power output for front, center and
surround speakers. Depending on the sound field
settings and the source, there may be no sound
output.
Inputs
Analog
Digital (Coaxial) Impedance: 75 ohms
Outputs (Analog)
SUB WOOFER
Tone
Gain levels
Reproduction frequency range:
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate Frequency
AM tuner section
Tuning range
With 9-kHz tuning scale:
Antenna
Intermediate Frequency
60
GB
85 W + 85 W
RMS output
FRONT:122 W
per channel
CENTER:122 W
SURROUND:122 W
per channel
Sensitivity: 800 mV/
50 kohms
Voltage: 2 V/1 kohm
±6 dB, 1 dB step
28 – 20,000 Hz
87.5 – 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
531 – 1,602 kHz
Loop antenna
450 kHz
Video section
Inputs/Outputs
Video:
COMPONENT VIDEO:
General
Power requirements 230 V AC, 50/60 Hz
Power consumption 190 W
Power consumption (during standby mode)
Dimensions (width/height/depth) (Approx.)
Mass (Approx.)
Speaker section
• Front speakers (SS-MSP680)
• Center speaker (SS-CNP680)
• Surround speakers (SS-SRP680)
Front/center speakers
Surround speakers
Speaker units
Enclosure type
Rated Impedance
Dimensions (width/height/depth) (Approx.)
Front/surround speakers
Center speaker
Mass (Approx.)
Front speaker
Center speaker
Surround speaker 0.5 kg
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
P /C : 0.7 Vp-p, 75 ohms
B B
P /C : 0.7 Vp-p, 75 ohms
R R
80 MHz HD Pass Through
0.3 W
430 × 145 × 300 mm
including projecting parts
and controls
7.5 kg
Full range, magnetically
shielded
Full range
70 mm cone type
Closed type
6 ohms
91 × 96 × 102 mm
155 × 96 × 101 mm
0.6 kg
0.7 kg