3B: Connecting The Video Components - Sony HTP-78DW Operating Instructions Manual

3b: Connecting the video components

How to connect your
components
This section describes how to connect your
video components to this receiver. Before you
begin, refer to "Component to be connected"
below for the pages which describe how to
connect each component.
After connecting all your components,
proceed to "4: Connecting the antennas" (page
23).
Component to be connected
Component
TV
DVD player/DVD recorder
Satellite tuner/Set-top box
VCR
Video input/output jack to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
TV, etc. INPUT jack
Receiver
Page
MONITOR OUT
jack
18
19
21
22
Receiver INPUT
jack
Video component
OUTPUT jack
Notes
• Connect image display components such as a TV
or a projector to the MONITOR OUT jack on the
receiver.
• Be sure to turn on the receiver when the video and
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
COMPONENT
VIDEO VIDEO
COMPONENT
VIDEO VIDEO
COMPONENT
VIDEO
VIDEO
COMPONENT
VIDEO VIDEO
High quality image
17 GB