Sony HTP-78DW Operating Instructions Manual page 12

Name Function
R
After pressing AMP MENU
,
(D), DVD MENU (J), or
V/v/B/b MENU (N), press V, v, B or
b to select the settings. Then,
press
for DVD MENU or MENU.
Press
selection of the receiver,
VCR, satellite tuner, CD
player, or DVD player.
S DISPLAY
Press to select the information
displayed on the TV screen of
the VCR, satellite tuner, CD
player or DVD player.
T -/--
Press -/-- and TV (P) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/ Press to select
x
– track numbers over 10 of the
– channel numbers of the
CLEAR Press to
– clear a mistake when you
– return to continuous
U Numeric
Press to
buttons
– preset/tune to preset
(number 5*)
– select track numbers of the
– select channel numbers of
Press the numeric buttons and
TV (P) at the same time to
select the TV channels.
V 2CH
Press to select 2CH STEREO
mode.
W A.F.D.
Press to select A.F.D. mode.
X AUTO CAL
Press to activate the Auto
Calibration function.
12
GB
to enter the selection
also to enter the
VCR, satellite tuner or CD
player.
Digital CATV terminal.
press the incorrect numeric
buttons.
playback, etc. of the satellite
tuner or DVD player.
stations.
CD player or DVD player.
Press 0/10 to select track
number 10.
the VCR or satellite tuner.
Name Function
Y TV/VIDEO
Press TV/VIDEO and TV
(P) at the same time to select
the input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
* The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.