4062-XXX
7. Remove the media size actuator from the card mount option.
8. Remove the card mount option.
Sensor (HCIT tray raised HP) with cable assembly removal
Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
1. Remove the HCIT cover, left. See
"High capacity input tray (HCIT) cover, left removal" on page
4-87.
2. Disconnect the sensor (HCIT tray raised HP) from the HCIT controller card assembly.
Note: Remove the cable from the restraints, and observe the routing for reinstallation.
4-95
Repair information