Siemens SIMATIC S7-1500R/H Getting Started page 21

Configuration
2.1 Configuring the assembly
4. Drag and drop the CPU to the task window in the network view.
Results:
– STEP 7 automatically creates both 1517H-3 PN CPUs for the redundant system.
– STEP 7 automatically assigns the MRP role "Manager (auto)" to the PROFINET
– STEP 7 displays both CPUs in the network view graphically.
Figure 2-2 CPUs in the network view
5. Select an ET 200SP interface module IM 155-6 PN HF (article number 6ES7155-6AU01-
0CN0) from the hardware catalog.
6. Drag and drop the interface module to the task window in the network view.
7. Drag and drop 2 further IM 155-6 PN HF interface modules to the task window in the
network view.
8. Select a SIMATIC Comfort Panel TP1900 Comfort from the hardware catalog as an HMI
device.
Recommendation: Configure the HMI devices with the HMI Device Wizard (Page 30).
9. Drag and drop the TP1900 Comfort to the task window in the network view.
10.Drag and drop a further TP1900 Comfort to the task window in the network view.
Results: The project has been created. The hardware components have been inserted. IP
addresses for the PROFINET interfaces of the devices have been automatically assigned.
20
interfaces X1 of both CPUs.
S7-1500R/H redundant system
Getting Started, 10/2018, A5E44910930-AA