Sony DVP-NS975V Operating Instructions Manual page 33

Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 26 to
28 ( through
B D
default setting and does not need to be
adjusted when you first connect the player.
See page 77 for using the Setup Display.
Audio Connection (pages 26 to 28)
A
• No additional settings are needed.
B-1 C-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 83).
B-2 C-2 D-2
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 83).
• Set "DIGITAL OUT" to "ON" (page 83).
D-1
• Set "DISTANCE," "LEVEL (FRONT),"
and "LEVEL (REAR)" according to the
connected speakers (page 86).
z Hints
• For connections
B-2
Set "48kHz/96kHz PCM" to "96kHz/24bit," only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 84).
• For connections
B-1
If the sound distorts even when the volume is
turned down, set "AUDIO ATT" to "ON"
(page 82).
• The speaker size you set in step 14 through 18 will
also adjust the Super Audio CD speaker size of
"SPEAKER SETUP."
If you want to change the speaker size for Super
Audio CDs, you can set in "SPEAKER SETUP"
(page 85).
). Each of these is the
C-2 D-2
C-1 D-1
33