Sony DVP-NS975V Operating Instructions Manual page 26

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
B-2
COAXIAL OPTICAL
DIGITAL OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
to coaxial or optical digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jacks.
26
CD/DVD player
COAXIAL OPTICAL FRONT REAR CENTER R-AUDIO-L VIDEO
L
R
DIGITAL OUT
WOOFER
HDMI OUT 5.1CH OUTPUT LINE OUT
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
Stereo amplifier (receiver)
Y P B P R
1 1
CONTROL S
COMPONENT VIDEO OUT
2 2 IN
S VIDEO
OUT
or
(white)
Stereo audio cord
(not supplied)
(white) (red)
to audio input
MD deck/DAT deck
. If the amplifier
B-1
(red)
R-AUDIO-L
LINE OUT
to LINE OUT L/R (AUDIO) 1 or 2
.
B-2
B-1
VIDEO
1
2