Table of Contents
Advertisement
Suunto D5
2.4. Product Compatibility
Suunto D5 can be used together with Suunto Tank POD for wireless transmission of tank
pressure to the dive computer. One Tank POD can be paired with the dive computer.
This dive computer can also be paired with the Suunto App over Bluetooth. With the app you
can transfer dive logs to Suunto App.
You may also connect this dive computer to a PC or Mac with the supplied USB cable and use
Suunto DM5 to modify device settings, plan dives, as well as update the dive computer
software.
Do not use this dive computer with any unauthorized accessories or attempt to connect
wirelessly with mobile apps or equipment not authorized or officially supported by Suunto.
2.5. Before You Dive
Make sure that you fully understand the use, displays and limitations of your dive instruments.
If you have any questions about this manual or dive computer, contact your Suunto dealer
before diving. Always remember that YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY!
This dive computer is intended for use with compressed air only. Do not use with any other
type of scuba diving. The compressed air supply must comply wtih EU standard EN12021:2014
requirements.
Before leaving on a dive trip, it is highly recommended that inspect your dive computer
closely to make sure everything is functioning properly.
At the dive site, you should perform your manual checks before entering the water.
For the dive computer, ensure that:
1. Suunto D5 is in the correct mode and the display is working as expected.
2. Altitude setting is correct.
3. Personal setting is correct.
4. Deepstops are set correctly.
5. Unit system is correct.
6. Compass is calibrated. Start the calibration manually to also confirm that the dive
computer audible sounds are working. After successful calibration, you should hear a
sound.
7. The battery is fully charged.
8. All primary and backup gauges for time, pressure and depth, both digital and mechanical,
are showing correct, consistent readings.
9. If Suunto Tank PODs are in use, check that Suunto Tank POD is properly installed and the
tank valve is open. Please see the Suunto Tank Pod User Guide for detailed information
and proper use.
10. If Suunto Tank PODs are in use, check that connections are working and gas selections
are correct.
NOTE: For Suunto Tank POD related information please see the instructions provided
with the product.
9
Advertisement
Table of Contents
