BMW G 650 GS 2010 Rider's Manual page 98

8
96
Remove two screws 3.
Remove cap of oil fill loca-
tion 4.
z
Slacken screw 5.
Pull side panel out of mount at
position 6, then remove side
panel upward. When doing so,
make sure that rubber cup 7 is
not damaged.
Installing left side panel
fairing
Guide fairing side panel over oil
fill location from above. When
doing so, make sure that rub-
ber cup 7 is not damaged.
Insert fairing side panel in cen-
ter fairing panel at points 8 and
press into mount 6.