BMW G 650 GS 2010 Rider's Manual page 88

8
86
Close connector 1.
Replacing front and rear
turn indicator bulbs
z
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Remove screw 1.
Pull glass on screw connection
side out of mirror housing.
Press bulb 2 into socket and
turn counterclockwise to re-
move.
Replace defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W