Switching on ABS
4
function
34
z
Press and hold button 1 until
ABS warning light changes its
display behavior.
ABS warning light goes
out; if self-diagnosis has
not been completed, it begins to
flash.
Release button 1 within two
seconds.
ABS warning light remains
off or continues to flash.
ABS function is switched on.
As an alternative, the ignition
can also be switched off and
then on again.
If the ABS light continues
to light up after switching
the ignition off and then on again,
an ABS fault has occurred.
Clutch
Adjusting clutch lever
Adjusting the clutch lever
while driving can lead to
accidents.
Only adjust the clutch lever when
the motorcycle is stationary.
Turn adjusting screw 1 into
desired position.
The adjusting screw can be
turned more easily if you
press the clutch lever forward
when doing so.
Adjustment options:
from Position 1: smallest dis-
tance between handlebar grip
and clutch lever
to Position 3: largest distance
between handlebar grip and
clutch lever