Step 4: Connecting The Audio Cords - Sony DVP-NS325 Operating Instructions Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 41),
TVS WIDE (page 41)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 41)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 41).
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 62)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 62)
– DTS (5.1ch) (page 62)
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
through .
A D
Connection
(page 18)
A
(page 19)
B
(page 20)
C
(page 21)
D
Your setup (example)
,continued
17