Specifications - Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual

Specifications

System
Laser
Signal format system
Audio characteristics
Frequency response
Signal-to-noise ratio (S/N ratio)
Harmonic distortion
Dynamic range
Wow and flutter
The signals from LINE OUT L/R (AUDIO) jacks are measured. When you play PCM sound tracks with a 96
kHz sampling frequency, the output signals from the DIGITAL OUT (COAXIAL) jack are converted to 48
kHz sampling frequency.
Outputs
Jack name
DIGITAL OUT (COAXIAL) Phono jack
LINE OUT (AUDIO)
LINE OUT (VIDEO)
S VIDEO OUT
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Supplied accessories
See page 14.
Specifications and design are subject to change without notice.
Semiconductor laser
PAL/(NTSC)
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)
CD : 2 Hz to 20 kHz (±0.5 dB)
115 dB (LINE OUT L/R (AUDIO) jacks only)
0.003 %
DVD: 103 dB
CD: 99 dB
Less than detected value (±0.001 % W PEAK)
Jack type
0.5 Vp-p
Phono jack 2 Vrms (50 kilohms)
Phono jack
4-pin mini DIN Luminance signal: 1.0 Vp-p
220 to 240 V AC, 50/60 Hz
12 W
430 74 256 mm (width/height/depth) incl. projecting parts
2.7 kg
5 C to 35 C
25 % to 80 %
Maximum output level
1.0 Vp-p
Colour signal: 0.3Vp-p (PAL)
0.286Vp-p (NTSC)
Load impedance
75 ohms terminated
Over 10 kilohms
75 ohms, sync negative
75 ohms, sync negative
75 ohms terminated
69