Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual page 22

Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and
C
3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital,
MPEG audio, or DTS decoder, refer to page 24.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, centre, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use
(receiver) has a digital input jack, use
xRecommended surround sound effects using this connection with your amplifier (receiver)
Dolby Surround (Pro Logic) (page 67)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
22
.
C-2
. If your amplifier
C-1