Step 3: Connecting The Mains Lead; Step 4: Quick Setup - Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual

Step 3: Connecting the Mains Lead

Plug the player and TV mains lead (power cords) into a mains.
Do not connect the mains lead of your player to a "switched" mains of an amplifier (receiver).
Otherwise, when you turn off the power of your amplifier (receiver), the settings for the player
may be lost.

Step 4: Quick Setup

Follow the steps below to make the minimum number of basic adjustments to the player. To skip
an adjustment press >, to return to the previous adjustment, press ..
POWER
A Turn on the TV.
B Switch the input selector on the TV to the player.
C Press POWER on the player and press [/1 on the remote.
"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen. If this message does
not appear, select "QUICK" under SETUP in the Control Menu (page 13) to run Quick Setup.
D Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
The available languages differ depending upon the player model.
26
ENTER
./> X/x
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
NEDERLANDS
ENGLISH
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
[/1
./>
X/x
ENTER