Custom Settings (Custom Setup) - Sony DVP-NC685V Operating Instructions Manual

BLACK LEVEL (COMPONENT OUT)
Selects the black level (setup level) for the
video signals output from the COMPONENT
VIDEO OUT jacks.
You cannot select this when the player
outputs progressive signal and the
PROGRESSIVE indicator lights up in blue
on the front panel.
ON Sets the black level of the output
signal to the standard level.
OFF Lowers the standard black level.
Use this when the picture
becomes too white.
Custom Settings
SETUP)
Use this to set up playback related and other
settings.
Select "CUSTOM SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 70).
The default settings are underlined.
CUSTOM SETUP
AUTO POWER OFF:
AUTO PLAY:
DIMMER:
PAUSE MODE:
TRACK SELECTION:
MULTI-DISC RESUME:
CD DIRECT:
AUTO POWER OFF
Switches the Auto Power Off setting on or
off.
OFF Switches this function off.
ON The player enters standby mode
when left in stop mode for more
than 30 minutes.
AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
OFF Switches this function off.
ON Automatically starts playback
when the player is turned on.
DIMMER
Adjusts the lighting of the front panel display.
BRIGHT Makes the lighting bright.
DARK
Makes the lighting dark.
AUTO
Makes the lighting dark if you
DARK
do not operate the player or the
remote for a short while.
(CUSTOM
OFF
OFF
BRIGHT
AUTO
OFF
ON
OFF
73
c continued