Custom Settings (Custom Setup); Settings For The Sound (Audio Setup) - Sony DVP-NS72HP Service Manual

will help prevent your display device from
SD Displays standard definition
becoming damaged (ghosting). Press H to
picture with black frame.
turn off the screen saver.
HD Displays high definition picture
ON
with black frame.
OFF
HD Displays high definition picture
without black frame.
◆ BACKGROUND
(1920×1080i) Displays high definition picture
Selects the background colour or picture on
HD with black frame at 1920×1080
the TV screen when the player is in stop mode
pixels.
or while playing a CD, or DATA CD (MP3
(1920×1080i)
Displays high definition picture
audio)/DATA DVD (MP3 audio).
HD without black frame at
JACKET
1920×1080 pixels.
PICTURE
Notes
• To view the best picture quality, set this setting to
"(1920×1080i) HD " or "(1920×1080i) HD."
• "(1920×1080i) HD " and "(1920×1080i) HD"
GRAPHICS A preset picture stored in the
are effective only when you set "HDMI
RESOLUTION" to "1920x1080i" and "TV
TYPE" to "16:9."
BLUE
• If you set this setting to "(1920×1080i) HD " or
"(1920×1080i) HD," wipe, rotation, and zoom BLACK
function are not available.
• If you want to use wipe, rotation, and zoom
function; sets this setting to "SD ," "HD ," ◆ LINE
or "HD."
Selects video signals output from the LINE
• If you set this setting to "(1920×1080i) HD " or
(RGB)-TV jack on the rear panel of the
"(1920×1080i) HD," next image appears after
player.
black mute.
• HDMI signal will stop momentarily during
VIDEO
loading or unloading DATA CD or DATA DVD
S VIDEO
disc.
◆ YC RGB
C /RGB (HDMI)
B R
(COMPONENT
Selects the type of HDMI signal output from
OFF)
HDMI OUT jack.
YC C Outputs YC C signals. Notes
B R B R
• If your TV does not accept S video or the RGB
RGB Outputs RGB signals.
signals, no picture will appear on the TV screen,
even if you select "S VIDEO" or "RGB
(COMPONENT OFF)." Refer to the instructions
Notes
supplied with your TV.
• If the playback picture becomes distorted, set
• If your TV has only one SCART (EURO AV)
"YC C " to "RGB."
B R jack, do not select "S VIDEO."
• If the HDMI OUT jack is connected to equipment
• When you select "RGB (COMPONENT OFF),"
with a DVI jack, "RGB" signals will be you cannot use the PROGRESSIVE button or the
automatically output even when you select COMPONENT VIDEO OUT jacks.
"YC C ". • You cannot select "RGB (COMPONENT OFF)"
B R
when the player outputs progressive signals
◆ SCREEN SAVER
(page 17).
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play a CD, or DATA
CD (MP3 audio)/DATA DVD (MP3 audio)
for more than 15 minutes. The screen saver
◆ PAUSE MODE (DVDs only) ◆ DivX
Selects the picture in pause mode. Displays the registration code for this player.
For more information, go to
AUTO The picture, including subjects
http://www.divx.com/vod
that move dynamically, is
on the Internet.
output with no jitter. Normally,
select this position. ◆ HDMI CONTROL
FRAME The picture, including subjects Switches the HDMI CONTROL setting
that do not move dynamically, on or off.
is output in high resolution.
OFF
ON
◆ TRACK SELECTION (DVD VIDEO only)
Gives the sound track which contains the
highest number of channels priority when you
◆ LANGUAGE FOLLOW
play a DVD VIDEO on which multiple audio
formats (PCM, MPEG audio, DTS, or Dolby Switches the languages of the DVD player
Digital format) are recorded. to the same as the current TV OSD
language.
OFF No priority given.
You cannot select this when "HDMI
AUTO Priority given. CONTROL" is set to "OFF."
ON
Notes
OFF
• When you set the item to "AUTO," the language
may change. The "TRACK SELECTION" setting
Notes
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 57).
• Turn off any display before using this function.
• If you set "DTS" to "OFF" (page 63), the DTS
• The OSD language for player keeps if the TV's
sound track is not played even if you set "TRACK
language cannot be supported.
SELECTION" to "AUTO."
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels,
the player selects PCM, DTS, MPEG, and Dolby
Digital sound tracks in this order.
◆ MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback can be stored in
memory for up to 6 different DVD VIDEOs/
VIDEO CDs (page 27).
ON Stores the resume setting in
memory for up to 6 discs.
OFF
Does not store the resume
setting in memory. Playback
restarts at the resume point only
for the current disc in the player.
Note
If you run Quick Setup, Multi-disc Resume settings
stored in memory may return to the default settings.
Turns on the screen saver.
Turns off the screen saver.
The jacket picture (still picture)
appears, but only when the
jacket picture is already
recorded on the disc (CD-
EXTRA, etc.). If the disc does
not contain a jacket picture, the
"GRAPHICS" picture appears.
player appears.
The background colour is blue.
The background colour is
black.
Outputs video signals.
Outputs S video signals.
Outputs RGB signals and no
component video signals.
,continued
59
Switches this function off.
Allows you to use the HDMI
CONTROL features (page 17).
Switches this function on.
Switches this function off.
61
1-15
DVP-NS72HP/NS77H/NS77HP/NS78H/NS78HP
◆ 4:3 OUTPUT
This setting is effective only when you set
"TV TYPE" in "SCREEN SETUP" to
"16:9." Adjust this to watch 4:3 aspect ratio.
If you can change the aspect ratio on your TV,
change the setting on your TV, not the player.
FULL Select this when you can
change the aspect ratio on your
TV.
NORMAL Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left
and right sides of the image.
16:9 aspect ratio TV
60
Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the sound
according to the playback and connection
conditions.
Select "AUDIO SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 56).
The default settings are underlined.
AUDIO SETUP
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
MPEG: PCM
DTS: OFF
48kHz/96kHz PCM: 48kHz/16bit
AUDIO (HDMI): AUTO
◆ AUDIO DRC (Dynamic Range Control)
(DVDs only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to "AUDIO DRC."
This function affects the output from the
following jacks:
– LINE OUT L/R (AUDIO) jacks
– LINE (RGB)-TV jack
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack only when "DOLBY DIGITAL" is set
to "D-PCM" (page 63).
STANDARD Normally, select this position.
TV MODE
Makes low sounds clear even if
you turn the volume down.
WIDE Gives you the feeling of being
RANGE at a live performance.
◆ DOWNMIX (DVDs only)
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see "Checking the
audio signal format" (page 45). This function
affects the output of the following jacks:
– LINE OUT L/R (AUDIO) jacks
– LINE (RGB)-TV jack
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack when "DOLBY DIGITAL" is set to
"D-PCM" (page 63).
62
Custom Settings
(CUSTOM SETUP)
Use this to set up playback related and other
settings.
Select "CUSTOM SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 56).
The default settings are underlined.
CUSTOM SETUP
AUTO POWER OFF: ON
AUTO PLAY: OFF
DIMMER: BRIGHT
PAUSE MODE: AUTO
TRACK SELECTION: OFF
MULTI-DISC RESUME: ON
DivX: Registration Code
HDMI CONTROL: OFF
LANGUAGE FOLLOW: ON
◆ AUTO POWER OFF
Switches the Auto Power Off setting on or
off.
ON
The player enters standby mode
when left in stop mode for more
than 30 minutes.
OFF Switches this function off.
◆ AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
OFF Switches this function off.
ON
Automatically starts playback
when the player is turned on by
a timer (not supplied).
◆ DIMMER
Adjusts the lighting of the front panel display.
BRIGHT Makes the lighting bright.
DARK Makes the lighting dark.
AUTO Makes the lighting dark if you
DARK
do not operate the player or
remote for a short while.
DOLBY Normally, select this position.
Multi-channel audio signals are
SUR-
ROUND output to 2 channels for enjoying
surround sounds.
NORMAL
Multi-channel audio signals are
downmixed to 2 channels for use
with your stereo.
◆ DIGITAL OUT
Selects if audio signals are output via the
DIGITAL OUT (COAXIAL)/HDMI OUT
jack.
ON Normally, select this position. When
you select "ON," see "Setting the
digital output signal" for further
settings.
OFF The influence of the digital circuit
upon the analogue circuit is minimal.
If you are using the HDMI OUT jack,
PCM sound will be output depending
on the connected equipment. If the
signal is encrypted for copyright
protection purposes, the signal is only
output as 48 kHz/16 bit PCM.
Setting the digital output signal
Switches the method of outputting audio
signals when you connect a component such
as an audio component or MD deck with a
digital input jack.
For connection details, see page 19.
Select "DOLBY DIGITAL," "MPEG,"
"DTS," and "48kHz/96kHz PCM" after
setting "DIGITAL OUT" to "ON."
If you connect a component that is
incompatible with the selected audio signal, a
loud noise (or no sound) may be heard from
the speakers, risking damage to your ears or
speakers.
Notes
• The AV SYNC function (page 36) is not effective
if you use the DIGITAL OUT (COAXIAL) jack,
and set "DOLBY DIGITAL," "MPEG" or "DTS"
to "DOLBY DIGITAL," "MPEG" or "ON"
respectively.
• The AV SYNC function (page 36) is not effective
if you connect a Dolby Digital or DTS-compliant
device via the HDMI OUT jack, and set "DOLBY
DIGITAL," "MPEG" or "DTS" to "DOLBY
DIGITAL," "MPEG" or "ON" respectively.