Setting Up Static IP
on the Computer
To communicate with the Router from a computer on the network (to use the Web
Configuration Utility, for example), the user may have to switch the
tings from
-enabled to static
DHCP
the same network subnet.
To set up static
IP
instructions.
☞
Note: The following procedures are based on the Router's fac-
tory default
changed, enter the new
address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
IP
on a computer, select the operating system and follow the
address. If the Router's
IP
IP
, so that the computer and the Router are on
address has been
IP
address when instructed to enter an
75
B
address set-
IP
IP