Printing Images Recorded On "Memory Stick - Sony PVP-MSH Operating Instructions Manual

Printing images recorded on "Memory
Stick"
Be sure to use a fully charged battery when using the battery to make
prints.
Insert a recorded "Memory Stick" into your camcorder.
1
Insert the print cartridge and attach this unit to your
camcorder.
2
Set the POWER switch on your camcorder to MEMORY.
3
Play back the still image you want to print by operating your
camcorder.
4
Open the printer cover, then make sure that the PAPER lamp
is flashing slowly. Insert a piece of print paper.
5
Press PRINT deeper.
PREPARING appears on the LCD screen.
While the ribbon is being aligned, the print paper is sometimes
inserted and ejected from the left and right sides of the body without
the LCD screen turning off even if POWER lamp lights.
6
Printing is started.
The image on the LCD screen disappears.
During printing, priht lamps 1 to 4 light in order, and the print paper
is fed back and forth four times.
When printing ends, the image appears on the LCD screen.
It takes about 160 seconds to make a print.
18-US
PREPARING