Table of Contents
Advertisement
TV Hookups
This connection is for listening to the sound through TV
speakers (L: left, R: right). Refer to the instructions
supplied with the component to be connected.
Some setup adjustments are necessary for the player. If
you run Quick Setup (page 14), you can make the
minimum number of basic adjustments to the player.
z
You can enjoy surround sound using your TV's built-in
speakers
You can use sound imaging to create virtual rear speakers from
the sound of built-in TV speakers without using actual rear
speakers (TVS: TV Virtual Surround). For details, see page 35.
CD/DVD player
DIGITAL OUT
LINE OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
R – AUDIO 1 – L
COAXIAL
OPTICAL
R – AUDIO 2 – L
To LINE
OUT
AUDIO
: Signal flow
8
S VIDEO
COMPONENT
VIDEO OUT
OUT
Y
VIDEO 1
C
B
C
R
VIDEO 2
To LINE
To S VIDEO
OUT
OUT
VIDEO
To video input
To audio input
Required cords
Audio/video connecting cord (supplied) (1)
Yellow
White (L)
Red (R)
S video cord (not supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate connectors on the components: Yellow
(video) to Yellow, Red (right) to Red and White (left) to White. Be
sure to make connections firmly to avoid hum and noise.
If your TV has an S video input connector, connect the
component via the S VIDEO OUT connector using an S video
cord (not supplied). You will get a better picture.
Refer to the instructions supplied with the TV to be connected.
To S VIDEO
input
TV
INPUT
VIDEO
S VIDEO
L
AUDIO
R
Yellow
White (L)
Red (R)
To mains
Advertisement
Table of Contents
