Resuming Playback From The Point Where You Stopped The Disc (Resume Play) - Sony DVP-K360 Operating Instructions Manual

Resuming Playback from the Point Where You Stopped the
Disc (Resume Play)
The player remembers the point where you stopped the
disc and when "RESUME" appears on the front panel
display, you can resume playback from that point.
As long as you do not open the disc tray, Resume Play
will work even if the player enters standby mode by
pressing @/1 on the remote.
H
1
While playing a disc, press x to stop playback.
"RESUME" appears on the front panel display and
"Disc will restart from current point. To start from
beginning, press [STOP] x again." appears on the TV
screen.
If "RESUME" does not appear, Resume Play is not
available.
2
Press H.
The player starts playback from the point where you
stopped the disc in Step 1.
z
To play from the beginning of the disc
When the playing time appears on the front panel display before
you start playing, press x to reset the playing time, then press
H.
20
Notes
• Resume Play may not be available on some DVDs.
• Resume Play is not available in Shuffle or Program Play mode.
• Depending on where you stopped the disc, the player may
• The point where you stopped playing is cleared when:
H
x
x
resume playback from a different point.
– you open or close the disc tray
– you turn the power off by pressing POWER on the player
– you change the play mode
– you start playback after selecting a title, chapter or track
– you change the settings in the setup display