Sony DVP-CX777ES Operating Instructions (DVD Player DVPCX777ES) Operating Instructions Manual page 86

2
Hold down [/1, and enter the
manufacturer's code for your AV
amplifier (receiver) using the number
buttons (see "Code numbers of
controllable AV amplifiers
(receivers)" below).
3
Release [/1.
The VOL +/
amplifier's volume.
If you want to control the TV volume
Slide the TV/DISC EXPLORER/DVD
switch to TV.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Manufacturer
Sony*
Denon
Kenwood
Onkyo
Pioneer
Sansui
Technics
Yamaha
* If you cannot control the volume of your Sony AV
amplifier (receiver) with the remote, try entering
the code number 91, and change the command
mode of your amplifier (receiver) to
"COMMAND MODE [AV1]" (not all amplifiers
have this option).
Refer to the instructions supplied with your
amplifier (receiver) to change the command
mode.
z Hint
If you want to control the TV's volume even when
the TV/DISC EXPLORER/DVD switch is set to
DVD, repeat steps 1 and 2 and enter the code
number 90 (default).
86
– buttons control the AV
Code number
80, 88, 89, 91
84, 85, 86
92, 93
81, 82, 83
99
87
97, 98
94, 95, 96