Sony DVP-CX777ES Operating Instructions (DVD Player DVPCX777ES) Operating Instructions Manual page 20

A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 24). (Do this if you are
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier
(receiver) having component video input jacks (Y/P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images. If your TV accepts progressive 480p
format signals, you must use this connection and set "COMPONENT OUT" in "SCREEN
SETUP" to "PROGRESSIVE" (page 90).
To change the aspect ratio for the connected TV
Depending on the disc and the TV type (standard 4:3 screen TV or wide screen TV), the image
may not fit the TV screen. If this happens, change the aspect ratio (page 89).
If your TV or video component has an S-LINK (CONTROL S) connector
You can control the player by pointing the remote at the remote sensor on the TV or video
component. This feature is convenient if you place the player and the TV or video component at
a distance from each other.
Connect the TV or video component via the S-LINK/CONTROL S jack using an S-link (control
S) cord (not supplied). Refer to the instructions supplied with the component to be connected.
20
Yellow (Video)
White (L)
Red (R)
Green
Blue
Red
Yellow (Video)
White (L)
Red (R)
/P )
B R
Green
Blue
Red