Controlling The Tv With The Supplied Remote - Sony DAV-DZ270 Operating Instructions Manual

– front and surround speakers are not correctly
connected.
10
Press C/c to select [YES] or [NO], then
press
x The measurement is OK.
Disconnect the calibration mic, then select
[YES]. The result is implemented.
x The measurement is not OK.
Follow the message, then select [YES] to
retry.
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not change the disc.
– do not insert or eject a disc.
– do not connect the headphones to the unit.
– do not disconnect the calibration mic.
• The measurement for [SUBWOOFER] is always
[YES] since the system does not perform subwoofer
calibration.
Tip
• You can check the distance between the listening
position and each speaker. See page 58.
80
GB
.
Controlling the TV with
the Supplied Remote
You can control the TV (Sony only) by using
following buttons. Use these buttons (other than
TV [/1, TV INPUT, and TV VOL +/–) while
pressing the TV button.
Note
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons.
• Depending on the area, the name of the button may
differ.
By pressing You can
TV [/1 Turn the TV on/off.
TV INPUT Switch the TV's input source
between the TV and other input
sources.
TV VOL +/– Adjust the TV volume.
TV CH +/–* Select the TV channel.
(PROG +/–*)
Number Select the TV channel.
-
buttons*, *
ENTER*
TOOLS* Displays the operation menu for
the current display.
RETURN* Return to the previous channel or
layer on the menu of the TV.
MENU* Display the menu of the TV.
MUTING* Turn off the TV sound
temporarily.
C/X/x/c*,
* Select the item on the menu.
* Use these buttons while pressing the TV button.