Table of Contents
Advertisement
4
Press X/x to select [QUICK], then press
.
The Quick Setup display appears.
Setting the type of video
output to match your TV
Depending on the connection of the TV
(page 18), select the type of video output of the
system.
To select the type of video signal
output from the HDMI OUT jack
When you connect the unit and the TV with the
HDMI cable, select the type of video signals
output from the HDMI OUT jack.
For details, refer also to the operating
instructions supplied with the TV/projector, etc.
1
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
2
Press
DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press X/x to select
[SETUP],
then press
.
The options for [SETUP] appear.
4
Press X/x to select [CUSTOM], then
press
.
The Setup Display appears.
5
Press X/x to select [HDMI SETUP], then
press
.
The options for [HDMI SETUP] appear.
6
Press X/x to select [HDMI
RESOLUTION], then press
.
7
Press X/x to select the desired setting,
then press
.
• [AUTO (1920
1080p)]: The system
×
outputs the optimal video signal for the
connected TV.
• [1920
1080i]: The system outputs 1920
×
× 1080i* video signals.
• [1280
720p]: The system outputs 1280 ×
×
720p* video signals.
• [720
480p]**: The system outputs 720 ×
×
480p* video signals.
* i: interlace, p: progressive
** Depending on the country model, [720 × 576p]
may appear.
Note
• When “HDMI” lights up in the front panel display,
images other than [720 × 480p] or [720 × 576p] are
stretched vertically.
Does your TV accept progressive
signals?
Progressive is the method for displaying TV
images which reduces flickering and sharpens
the image. To use this method, you need to
connect to a TV that accepts progressive signals.
1
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
2
Press
DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press X/x to select
[SETUP],
then press
.
The options for [SETUP] appear.
4
Press X/x to select [CUSTOM], then
press
.
The Setup Display appears.
5
Press X/x to select [VIDEO SETUP],
then press
.
The options for [VIDEO SETUP] appear.
6
Press X/x to select [PROGRESSIVE
(COMPONENT OUT)], then press
.
7
Press X/x to select the desired setting,
then press
.
[OFF]: The system does not output
progressive signals. Select this setting
when:
– your TV does not accept progressive
signals, or,
– your TV is connected to jacks other than
the COMPONENT VIDEO OUT jacks.
Page 29
GB
Hide quick links:
Advertisement
Table of Contents
