Resuming Playback From The - Sony DAV-DZ270 Operating Instructions Manual

To select a playback layer when
playing a hybrid Super Audio CD
Some Super Audio CDs consist of an HD layer
and a CD layer. You can select the playback
layer you want to listen to.
Note
• When the Super Audio CD does not have the HD
layer, you cannot select the playback layer.
1
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
2
Press X/x to select
AUDIO CD/CD LAYER], then press
The options for [SUPER AUDIO CD/CD
LAYER] appear.
3
Press X/x to select the desired setting
and press .
• [SUPER AUDIO CD]: You can play the
HD layer.
When the system is playing a HD layer,
"SA-CD" lights up in the front panel
display
• [CD]: You can play the CD layer.
When the system is playing a CD layer,
"CD" lights up in the front panel display.
Note
• Each play mode function works only within the
selected layer or playback area.
• When you select a CD layer, you cannot change a
playback area.
• Super Audio CD audio signals are not output from the
HDMI OUT jack.
Playing a VIDEO CD with PBC
functions (Ver.2.0)
(PBC Playback)
With PBC (Playback Control) functions, you
can enjoy simple interactive operations, search
functions, and other such operations.
PBC playback allows you to play a VIDEO CD
interactively by following the menu on the TV
screen.
1
2
3
4
To go back to the menu
[SUPER
.
Press O RETURN.
Note
• Depending on the VIDEO CD, [Press ENTER] in
Step 3 may appear as [Press SELECT] in the
operating instructions supplied with the disc. In this
case, press H.
Tip
• To play without using the PBC function, press ./
> or the number buttons while the system is in stop
mode to select a track, then press H or
system starts playback. You cannot play still pictures
such as a menu. To return to PBC playback, press x
twice, then press H.

Resuming playback from the

point where you stopped the disc
(Resume Play)
When you stop the disc, the system remembers
the point where you pressed x and "RESUME"
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system is set to standby mode
by pressing "/1.
1
2
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
Select the item number you want using
the number buttons.
Press .
Follow the instructions in the menu for
interactive operations.
Refer to the operating instructions supplied
with the disc, as the operating procedure
may differ depending on the VIDEO CD.
While playing a disc, press x to stop
playback.
"RESUME" appears in the front panel
display.
Press H.
The system starts playback from the point
where you stopped the disc in Step 1.
. The
39
GB