Sony DAV-DZ270 Operating Instructions Manual page 38

Note
• While the system is playing a Super VCD on which
the audio track 2 is not recorded, no sound will come
out when you select [2:STEREO], [2:1/L], or [2:2/R].
Checking the audio signal
format
* Except for United Kingdom and North American
models.
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears as
shown below.
x DVD
Example:
Dolby Digital 5.1 channel
Surround (L/R)
1: ENGLISH
Front (L/R) +
Center
Currently playing program format
Example:
Dolby Digital 3 channel
Front (L/R)
1:SPANISH
Currently playing program format
38
GB
* *
LFE (Low
Frequency Effect)
DOLBY DIGITAL 3 / 2 .1
L C R
LFE
LS RS
Surround
(Monaural)
DOLBY DIGITAL 2 / 1
L R
S
x DATA CD (DivX video file)/DATA DVD
(DivX video file) (Except for United
Kingdom and North American models)
Example:
MP3 audio
1:MP3 128k
Bit rate
Selecting a playback area for a
Super Audio CD
You can play the Super Audio CD (page 101) by
selecting the playback area.
To select a playback area on a 2
channel + Multi-channel Super
Audio CD
Some Super Audio CDs consist of a 2 channel
playback area and a multi-channel playback
area. You can select the playback area you want
to listen to.
1
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
2
Press X/x to select
2CH], then press
The options for [MULTI/2CH] appear.
3
Press X/x to select the desired setting
and press .
• [MULTI]: You can play the multi-channel
playback area.
• [2CH]: You can play the 2 channel
playback area.
Note
• You cannot change the playback area during
playback.
[MULTI/
.