Connecting to the USB Port
If you are connecting to the USB port:
Note
- a connection (to the USB port) can only be made in a non-hazardous environment
- the USB port cover must be reinstalled before the router can be deployed in a hazardous environment
Hazardous Locations Standards and Marking Strings
The following standards were used for the
hazardous locations approvals and certifications:
ANSI/ASA 12.12.01-2013
CAN/CSA C22.2 No. 60079-0-11 Ed. 2
CAN/CSA C22.2 No. 60079-15-12 Ed. 1
CSA C22.2 No. 213-M1987
EN 60079-0:2012 +A11:2013
EN 60079-15:2010
IEC 60079-0 6th Edition
IEC 60079-15 4th Edition
UL 60079-0, 5th Ed, 2009-10-21
UL 60079-15, 3rd Ed, 2009-7-17
The following hazardous locations strings are
provided on the router:
Class 1, Div 2, Groups A B C D
Class I, Zone 2, AEx nA IIC T4 Gc
DEMKO 15 ATEX 1573X
Class 1, Zone 2, AEx nA IIC T4 Gc
EMC Information
For EMC and safety information, see the Regulatory Compliance and Safety Information at this URL:
https://www.cisco.com/c/en/us/td/docs/routers/access/800/829/regulatory/IR800rcsi.html
78-100612-01A0
II 3G, Ex nA IIC T4 Gc
Getting Started and Product Document of Compliance for the Cisco IR809 Integrated Services Router
9