Connecting The Tv - Sony 3-283-045-11(1) Operating Instructions Manual

2 Connecting the TV

For video output to your TV, check the video input jacks of the TV, and select connection method A
or B. Picture quality improves in order from A (standard) to B (HDMI).
When the TV has the digital optical or coaxial output jack, you can improve sound quality by
connecting with the digital cord (A).
Digital optical cord
(not supplied)
Digital coaxial cord
(not supplied)
L IN
D IG IT A
O P T IC A L
L
C O A X IA
T V
To the digital coaxial output jack of
the TV
To the digital optical output jack of
the TV
SPEAKER
DIGITAL IN
CENTER SUBWOOFER
COAXIAL OPTICAL
TV
HDMI* cable
(not supplied)
O U T
H D M I
To the HDMI IN jack of the TV
* HDMI (High-Definition Multimedia Interface)
If your TV has the HDMI jack, use this connection and select the type of output signal (page 31).
Note
• During the "DMPORT" function, video signal is not output from the HDMI OUT jack.
• The system can accept both digital and analog signals. Digital signals have priority over analog signals. (COAXIAL
has priority over OPTICAL.) If the digital signal ceases, the analog signal will be processed after 2 seconds.
or
SPEAKER
FRONT R FRONT L
EZW-RT10
DC5V
0.7A MAX
HDMI OUT DMPORT
SCART (EURO AV) cord
(not supplied)
P U T
O U T
To the SCART (EURO AV) jack of the TV
Rear panel
ANTENNA
COAXIAL 75
FM AM
EURO AV
R AUDIO IN L
LINE OUTPUT(TO TV)
O A V
E U R
T V )
(T O
21
GB