Changing The Password - Sony 3-283-045-11(1) Operating Instructions Manual

Enter a 4-digit password using the number
buttons, then press
The display for confirming the password
appears.
x When you have already registered a
password
The display for entering the password
appears.
7
Enter or re-enter your 4-digit password
using the number buttons, then press
.
The display for setting the playback
limitation level appears.
PARENTAL CONTROL
LEVEL:
STANDARD:
CHANGE PASSWORD:
8
Press X/x to select [STANDARD], then
press .
The selection items for [STANDARD] are
displayed.
9
Press X/x to select a geographic area
as the playback limitation level, then
press .
The area is selected.
When you select [OTHERS t], select and
enter a standard code in the table of
"Parental Control Area Code List"
(page 113) using the number buttons.
10
Press X/x to select [LEVEL], then press
.
The selection items for [LEVEL] are
displayed.
11
Press X/x to select the desired level,
then press .
[PARENTAL CONTROL] setting is
complete.
The lower the value, the stricter the
limitation.
.
OFF
USA
To turn off the [PARENTAL
CONTROL] function
Set [LEVEL] to [OFF] in Step 11.
To play a disc for which
[PARENTAL CONTROL] is set
1
Load the disc and press H.
The display for entering your password
appears.
2
Enter your 4-digit password using the
number buttons, then press
The system starts playback.
Note
• When you play discs which do not have the
[PARENTAL CONTROL] function, playback
cannot be limited on this system.
• Depending on the disc, you may be asked to change
the parental control level while playing the disc. In
this case, enter your password, then change the level.
If the Resume Play mode is canceled, the level returns
to the previous level.
Tip
• If you forget your password, remove the disc and
repeat Steps 1 to 7 of "Restricting Playback of the
Disc" (page 54). When you are asked to enter your
password, enter "199703" using the number buttons,
then press . The display will ask you to enter a new
4-digit password. After you enter a new 4-digit
password, replace the disc in the unit and press H.
When the display for entering your password appears,
enter your new password.

Changing the password

1
Press FUNCTION +/– repeatedly until
"DVD" appears in the front panel
display.
2
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press X/x to select
then press .
The options for [SETUP] appear.
4
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
.
[SETUP],
55
GB