3: Connecting The Tv - Sony HT-M2 Operating Instructions Manual

3: Connecting the TV

Before connecting cords, be sure to disconnect
the AC power cord (mains lead).
Audio signals
A
A Audio cord (not supplied)
Note
Depending on the status of the connection between
the TV and the antenna (aerial), the image on the TV
screen may be distorted. If this is the case, place the
antenna (aerial) farther away from the receiver.
14
GB
TV
Tips
• To output the sound of the TV from the speakers
connected to the receiver, be sure to
– connect the audio output jacks of the TV to the
TV IN jack of the receiver.
– turn off the TV's volume or activate the TV's
muting function.
• When you connect the audio output jack of the TV
to the TV IN jacks of the receiver to output the TV
sound from the speakers connected to the receiver,
set the sound output jack of the TV to "Fixed" if it
can be switched between either "Fixed" or
"Variable".