Call Control - Polycom VVX410 Quick User Manual

FLIP CO
Better . Connected
Phone Basics
Changing
Press home button (
ring tones
pick ring tone and press select.
Setting the With the handset in its cradle, press the volume bar (
ring volume
decrease, this will automaticly save.
Press the speaker button (
Setting the
speaker volume
down to decrease, this will automaticly save.
Lift the handset then press the volume bar (
Setting the
earpiece volume
this will automaticly save.

Call Control

Group pickup
To answer a phone that is part of your group, lift the handset and press more > GrPickup
To enable DND press the DND button and phone will display red phone icon in top right
DND
hand corner (
Place a call on
To place a caller on hold press the hold button (
hold
To go back to caller press resume key
Missed Calls
To check list of missed calls press the down arrow. This will then display all
missed calls to phone including DDI calls and hunt group calls.
To return to the 'Home' screen, press the home button (
Transferring While on a call press xfer button (
Calls
call is answered press xfer button (
to go back to original caller
Page 3 of 4 Flip Connect Hosted VoIP – Polycom VVX410 Quick User Guide
Polycom VVX410 Endpoint
ECT
TM
). To disable simply press DND again.
User Guide
) > settings > basic > ring type > default >
) then press the volume bar (
-
) > dial number > once 2nd
)again. If other caller does not answer press cancel
) up to increase, down to
-
+
) up to increase,
-
+
) up to increase, down to decrease,
+
).
) twice.
www. ipconnect.co.uk/support/userguides