Table of Contents
Advertisement
Ambient temperature
The figures displayed above the hour indicate the ambient temperature. It can
be displayed in degrees Celsius or Fahrenheit (see "Display in degrees Celsius/
Fahrenheit").
To adjust the set point, out of any adjustment mode, press down the
increase the set point (it will blink), or the
only be adjusted by increments of 0.5°C (1°F). To quickly scroll through the set point
values, press and hold down the button. The minimum set point is 3°C (37°F), and the
maximum set point is 30°C (86°F).
To return to the ambient temperature, do not press down any buttons for 3 seconds or
press down both
lowering the set point below 3°C (37°F). The set point value displayed will be --.-, and
heating system start up will be impossible.
Display in either degrees Celsius / Fahrenheit
The thermostat can display the ambient temperature and the set point in degrees
Celsius (standard factory setting) or Fahrenheit.
1. In any mode (Manual, Automatic or Preprogrammed), out of any adjustment mode,
press down the
options appear and °C or °F icon flashes.
2. Press down the
3. Press down the
down the
8
and
buttons simultaneously. You can turn off the thermostat by
button for 3 seconds and release it. The various icons and
button to confirm your choice.
or
button to switch from degrees Celsius to Fahrenheit. Press
button to confirm your choice.
button to decrease it. Set points can
button to
Hide quick links:
Advertisement
Table of Contents
