Paper Path; Cleaning Time Information - Epson ET-4500 Programming Manual

7.4 Paper path

Structure
Parameter counter
The parameter <paper path> is two bytes Binary code that indicate current paper path.
Following information is replied.
Paper Path
Cut Sheet (Auto Select)
*1: In the case of selecting remote 'PP' command with ASF Large Capacity, code becomes 01FFh irrespective of the paper
path.

7.5 Cleaning time information

Structure
Parameter counter
The parameter <cleaning time information> is two bytes Binary codes that indicate cleaning time or ink filling time.
The unit is second. (This time is total time not passage time or remains time.)
This parameter is added only when status code ST = 07H.
Revision: 1
Item Byte (Hex)
Header 1
1
Parameter 2
Item Byte (Hex)
Header 1
1
Parameter 2
Value (Hex)
06
02
Paper path information
code
0100h
Value (Hex)
0C
02
Cleaning time information
2016/09/02
Page: 71