Table of Contents
Advertisement
5.
Clear the area of all bystanders before starting.
6.
Keep hands, feet, hair and clothing away from
moving parts.
7.
Keep working area clean and dry to prevent slip-
ping and tripping.
8.
Do not run the mixer in an explosive atmosphere
or in a poorly ventilated or enclosed area.
9.
Wear appropriate hearing protection when oper-
ating for long periods of time.
10. Always attach safety chain when towing.
11. Do not exceed a safe travel speed when towing.
Slow down for corners and when going over
rough terrain.
12. Review safety instructions with all operators an-
nually.
Gas engine powered units:
•
Do not place hands in the drum unless the
engine is OFF and the spark plug wire is discon-
nected.
•
Stay away from hot engine components during
operation.
•
Do not smoke when refueling gas engine.
Electric motor powered units:
•
Do not place hands in the drum unless the motor is
OFF and the power cord unplugged.
•
Have a licensed electrician wire up and provide
power to the motor.
•
Only use a power cord that is grounded.
•
Always use an electrical cord with the required
power carrying capacity.
2.3
MAINTENANCE SAFETY
1.
Review the Operator's Manual and all safety
items before working with, maintaining or oper-
ating the Mixer.
2.
Stop engine or motor, disconnect spark plug wire
or unplug power cord, and wait for all moving
parts to stop before servicing, adjusting, repair-
ing, or cleaning.
3.
Follow good shop practices
-
Keep service area
clean and dry.
-
Be sure electrical
outlets and tools
are properly
grounded.
-
Use adequate
light for the job
at
4.
Keep hands, feet, clothing and hair away from all
moving and/or rotating parts.
5.
Do not place hands in the drum unless the
engine is off and the spark plug wire is discon-
nected or the power cord is unplugged.
6.
Do not attempt any adjustment or maintenance
to any system of the Mixer unless the power
source is disabled.
7.
Make sure that all guards, shields and hoods are
properly installed and secured before operating
the Mixer.
8.
Securely support the machine using blocks
or safety stands before working beneath it or
changing tires.
9.
Store and transfer gasoline, solvents, cleaners
or any flammable liquids only in safety standard
approved containers.
2.4 TRANSPORT SAFETY
1.
Read and understand ALL the information in the
Operator's Manual regarding procedures and
SAFETY when operating the Mixer in the work-
place and/or on the road.
2.
Always travel at a safe speed. Use caution when
making corners or on a rough surface.
3.
Make sure all the lights and reflectors that are
required by the local highway and transport au-
thorities are in place, are clean and can be seen
clearly by all overtaking and oncoming traffic.
4.
Do not allow riders on any part of the machine
during either road or highway travel.
5.
Always use a safety chain between the Mixer and
the towing vehicle when transporting.
4
Advertisement
Table of Contents
