Service Record - Crown 4S Operator's Manual

Annually or 400 Hours
1. Grease the electric motor bearings with
1/2 shot of grease (2 locations).
2. Change gearbox oil
3. Repack wheel bearings. (2 locations).
4. Check wheel nut torque.
5. Check axle mounting hardware.

5.1.4 SERVICE RECORD

See Lubrication and Maintenance sections for details of service. Copy this page to continue record.
ACTION CODE: š CHECK
L LUBRICATE
HOURS
SERVICED
BY
MAINTENANCE
DAILY OR 8 HOURS
š Engine Fluid Levels
š Engine Oil Level & Fuel Level
š Drive Belt Tension
L Drum Assembly Bearings (2)
L Clutch Linkage Shaft (1)
CL Engine, Motor & Compartment
WEEKLY OR 50 HOURS
C Engine Oil, Drain Plug & Fill Plug
CL Engine Air Intake Filter
š Gearbox Oil Level
ANNUALLY OR 400 HOURS
L Electric Motor Bearings (2)
C Gearbox Oil
R Wheel Bearings (2)
š Wheel Nut Torque
š Check Axle Mounting Hardware
Fig. 29 WHEELS
C CHANGE
RE REMOVE
37
CL CLEAN
R REPACK