Safety - Crown 4S Operator's Manual

2

SAFETY

This Safety Alert symbol means
ATTENTION! BECOME
SAFETY IS INVOLVED!
3 Big Reasons
SIGNAL WORDS:
Note the use of the signal words DANGER,
WARNING and CAUTION with the safety
messages. The appropriate signal word for
each message has been selected using the
following guide-lines:
SAFETY
YOU are responsible for the SAFE operation and mainte-
nance of your Concrete Mixer. YOU must ensure that you
and anyone else who is going to operate, maintain or work
around the Concrete Mixer be familiar with the operating
and maintenance procedures and related SAFETY informa-
tion contained in this manual. This manual will take you step-
by-step through your working day and alerts you to all good
safety practices that should be adhered to while operating
the Mixer.
SAFETY ALERT SYMBOL
ALERT! YOUR
Why is SAFETY important to you?
DANGER
WARNING
CAUTION
The Safety Alert symbol identifies im-
portant safety messages on the Crown
Mortar Mixer and in the manual. When
you see this symbol, be alert to the
possibility of personal injury or death.
Follow the instructions in the safety
message.
Accidents Disable and Kill
Accidents Cost
Accidents Can Be Avoided
- Indicates an imminently hazardous situ-
ation that, if not avoided, will result in
death or serious injury. This signal word
is to be limited to the most extreme situ-
ations, typically for machine components
that, for functional purposes, cannot be
guarded.
Indicates a potentially hazardous situ-
-
ation that, if not avoided, could result
in death or serious injury, and includes
hazards that are exposed when guards
are removed. It may also be used to alert
against unsafe practices.
Indicates a potentially hazardous situ-
ation that, if not avoided, may result in
-
minor or moderate injury. It may also be
used to alert against unsafe practices.
Remember, YOU are the key to safety. Good safety
practices not only protect you but also the people
around you. Make these practices a working part
of your safety program. Be certain that EVERYONE
operating this equipment is familiar with the recom-
mended operating and maintenance procedures and
follows all the safety precautions. Most accidents can
be prevented. Do not risk injury or death by ignoring
good safety practices.
1