Send By Transferjet - Sony DSC-WX5/WX5C Handbook

Sony digital camera user manual
Table of Contents

Advertisement

Send by TransferJet

TransferJet is a close-up, wireless transfer technology that allows data to be transferred by
closely aligning two products that you want to communicate with each other.
To find out whether your camera is equipped with the TransferJet function, check for the
(TransferJet) mark on the bottom of the camera.
Using a Memory Stick with TransferJet (sold separately) allows images to be transferred
between TransferJet-compatible devices.
For more details on TransferJet, see the operating instructions supplied with Memory Stick with
TransferJet.
1 Insert a Memory Stick with TransferJet into the camera, and press the
(Playback) button.
2 MENU t
(Send by TransferJet) t desired mode t z on the control
button
3 Transfer images by closely aligning the
camera and other device.
A notification sound is emitted when connection is made.
(This Image)
(Multiple
Images)
Notes
• Only still images can be transferred.
• Up to 10 images can be transferred at once. However, for 3D images, both the MPO file and the JPEG
file are transferred. Depending on the receiving device, up to 20 images are received.
• Set [TransferJet] to [On] in
• On an airplane, set [TransferJet] to [Off] in
place where you use.
• The connection is cut if transfer cannot be made within about 30 seconds. If this happens, select [Yes]
and realign the two
• Memory Stick with TransferJet and camera models with TransferJet are not sold in some countries and
regions due to local laws and regulations.
• Set the [TransferJet] function to [Off] in countries and regions other than where you purchased your
camera. Depending on the country or region, if you use the TransferJet function, you may be liable due to
local restrictions on transmission of electromagnetic waves.
Sends the currently displayed image in single-image mode.
You can select and send multiple images.
After step 2, perform the following.
1Select an image then press z.
Repeat the above step until there are no more images to be sent.
Select an image with a
2MENU t [OK] t z
(Settings) (page 116).
(Settings) (page 116). In addition, follow the rules of the
(TransferJet) marks on the camera and another device.
(TransferJet) marks on the
mark to release the
mark.
85
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cyber-shot dsc-wx5Dsc-wx5/bCyber-shot dsc-wx5c

Table of Contents