Installation - Smeg 60 Series User Manual

Built-in installation single appliance
1
2
3
6,5 (¼")
Wall
or
furniture
22 (�⁄ � ")
A Connecting element
For a built-in installation, to close gaps between the appliance and
the adjacent cabinets, special side profiles and aluminum covering
frames are provided.
Operate as follows:
Push the appliance into the installation niche
If the unit is to be installed inside a niche or within an enclosed
structure, it is necessary to design a ventilation shaft at the back of
the niche to assure proper ventilation at the back of the unit. A 5 mm
gap is sufficient to prevent overheating. Always mount front panels on
door and drawer before pushing the unit into its final position inside the
niche or structure.
Secure the appliance to the adjacent cabinets by fixing to these the
side profiles previously mounted on the appliance
To make this operation easier keep the door and the drawer open.
Check the levelling of the appliance, adjusting its feet and wheels
to correct it.
Mount the profiles the covering frames: first insert them laterally and
then push firmly until a "click" is heard
Side profiles mounting
Appliance
A
B
B Alluminium frame
Installation Guide
Series: Integrated

Installation

.
1
.
2
.
3
6,5 (¼")
Wall
or
furniture
22 (�⁄ � ")
19