Anti-Tipping Safety Assembly - Smeg 60 Series User Manual

" )
� ⁄ �
1
4 5 (
1
2
3
4
To avoid danger of the appliance tipping over
it is mandatory to secure the appliance to the
wall by means of two special brackets.
To prevent the appliance from tipping over an extra-long kit is vailable
up on request if the appliance needs to remain distanced from the
wall, it is mandatory to install two brackets on the upper part of the
appliance for fixing it securely to the wall.
Operate as follows:
2 x
The brackets should be applied as illustrated using the provided
screws and expansion plugs.
6 x
Place a bracket on the top of the appliance in correspondence to the
fixing holes and against the wall
Mark up the holes position on the wall
Drill the wall with an 8 mm (3/8") bit and insert the expansion plug
.
3
Reposition the bracket and fix it first to the cabinet and then to the
wall .
4
Installation Guide
Series: Integrated

Anti-tipping safety assembly

.
1
.
2
23