Advertisement
Using your machine
How to use
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the
thermostat will automatically turn the unit off.
Fully unwind the power
Plug in and switch the
cord. A yellow mark on
unit on by pressing the
the cord indicates the
power button.
recommended cord
length. Do not exceed
the cord beyond the
yellow mark.
Using accessories
Choose an accessory and push onto the telescopic
extension tube or hose.
Use the vacuum by moving
Remove the floorhead
the floorhead backwards
to use the hose in harder
and forwards for an
to reach places.
effective clean.
Taking care of your machine
Emptying and cleaning the dirt container
IMPORTANT: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening
or emptying the dirt container, or before connecting/disconnecting the attachments.
The dirt container should be emptied and cleaned regularly to allow the vacuum to perform at its optimum suction rate.
Press the dirt container
Hold the dirt container over a
release button to remove
bin. Press the dirt release clip
the dirt container.
at the bottom of the container.
The dirt release door will open
allowing dirt/debris to fall out.
Twist the shroud anti-clockwise
Tap the shroud against a bin to
to unlock and remove from the
remove any dirt or debris. Using
dirt container.
a dry cloth wipe the separator
and shroud clean.
Remove the clear dust
separator inside the dirt
container by twisting clockwise.
For easier cleaning, follow the
3-Step Clean process located on
the back of the dirt container.
Don't over fill the dirt container.
Replace the filters every
6-9 months.
Advertisement
