Send By Transferjet - Sony DSC-T99 Cyber-shot&reg Handbook

Digital still camera
Hide thumbs Also See for DSC-T99 Cyber-shot®:
Table of Contents

Advertisement

Send by TransferJet

TransferJet is a close-up, wireless transfer technology that allows data to be transferred by
closely aligning two products that you want to communicate with each other.
To find out whether your camera is equipped with the TransferJet function, check for the
(TransferJet) mark on the bottom of the camera.
Using a Memory Stick with TransferJet (sold separately) allows images to be transferred
between TransferJet-compatible devices.
For more details on TransferJet, see the operating instructions supplied with Memory Stick with
TransferJet.
1 Insert a Memory Stick with TransferJet into the
camera and press the
2
(Send by TransferJet) t desired mode
When the buttons are not displayed on the left side of the LCD
screen, touch
.
3 Transfer images by closely aligning the
camera and other device.
A notification sound is emitted when connection is made.
(This Image)
(Multiple Images)
Notes
• Only still images can be transferred.
• Up to 10 images can be transferred at once.
• First, set [TransferJet] to [On] by selecting
• While aboard an airplane, set [TransferJet] to [Off] by selecting
Settings) (page 113). In addition, always follow all regulations governing the location in which the
camera is being used.
• The connection is cut if transfer cannot be made within about 30 seconds. If this happens, select [Yes]
and realign the two
• Memory Stick with TransferJet and camera models with TransferJet are not sold in some countries and
regions due to local laws and regulations.
• Set the [TransferJet] function to [Off] in countries and regions other than where you purchased your
camera. Depending on the country or region, if you use the TransferJet function, you may be liable due to
local restrictions on transmission of electromagnetic waves.
(Playback) button.
Sends the currently displayed image in single-image mode.
You can select and send multiple images.
After step 2, perform the following.
1Select an image to be sent, then touch it.
Repeat the above steps until there are no more images to
be sent.
Touch an image with a
mark.
2Touch [OK] t [OK].
(TransferJet) marks on the camera and another device.
(TransferJet) marks on the
mark again to release the
t
t
(Settings)
(Main Settings) (page 113).
t
t
(Settings)
(Main
78
GB

Advertisement

Table of Contents
loading

Table of Contents