Copying Images To Your Computer Using The "Picture Motion Browser - Sony DSC-T200 Cyber-shot&reg Handbook

Copying images to your computer using the
"Picture Motion Browser"
Preparing the camera and the
computer
1
Insert a "Memory Stick Duo" with
recorded images into the camera.
• When copying images in the internal
memory, this step is unnecessary.
2
Insert the sufficiently charged
battery pack in the camera, or
connect the camera to a wall
outlet (wall socket) with the AC
Adaptor (not supplied).
• When you copy images to your computer
using a battery pack with little remaining
charge, copying may fail or image data may
become corrupted if the battery pack shuts
down too soon.
3
Press
the computer.
90
(Playback), then turn on
(Playback) button
Connecting the camera to your
computer
1 To a USB
jack
Cable for
multi-use terminal
"Connecting to Mass Storage..." appears on
the screen of the camera.
Access indicators*
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
* is displayed on the screen during the
communication session.
Do not operate the computer while the indicator
is displayed. When the indicator changes to
, you can start using the computer
again.
• If "Connecting to Mass Storage..." does not
appear, set [USB Connect] to [Mass Storage]
(page 73).
2 To the multi
connector